Amphoteric ionic polyacrylamide

Amphoteric polyacrylamide is formed by copolymerization of cationic monomers, acrylamide monomers, and hydrolytic dispersants. Through infrared spectroscopy analysis, it was found that the product chain not only has carboxyl negative charges after hydrolysis of acrylamide, but also vinyl positive charges. Therefore, the product constitutes an irregular polymer of zwitterionic ions with both positive and negative charges on the molecular chain.
  • Detailed Description

1、 Product Overview

 

Amphoteric polyacrylamide is formed by copolymerization of cationic monomers, acrylamide monomers, and hydrolytic dispersants. Through infrared spectroscopy analysis, it was found that the product chain not only has carboxyl negative charges after hydrolysis of acrylamide, but also vinyl positive charges. Therefore, the product constitutes an irregular polymer of zwitterionic ions with both positive and negative charges on the molecular chain. Made by granulation, drying, and crushing, the product appears as a white, small particle or powdered solid in appearance.

 

2、 Product specifications and main technical indicators

 

Molecular weight (million)

Solid content (%)

Effective pH range

Hydrolysis degree (%)

Residual monomer content

Dissolution rate (min)

1-2

≥88

1-14

50

10

≤0.05

3-4

≥88

1-14

20

25

≤0.05

5-6

≥88

1-14

5

5

≤0.05

 

3、 Main uses

 

1. The latest water treatment agent

 

In many situations, when treating sewage and water, the combination of anionic polyacrylamide and cationic polyacrylamide produces a non significant synergistic effect compared to using only one type of ionic polyacrylamide. Amphoteric polyacrylamide has a much greater ability to reduce surface tension than the ability of cations and anions to exist alone under the same conditions. In order to achieve the requirement of reducing surface tension, Both anionic and cationic polyacrylamide need to be used simultaneously, but improper use of both can result in white precipitates and loss of effectiveness. And zwitterionic polyacrylamide has the characteristics of zwitterionic ions, which can change frequently. Using zwitterionic polyacrylamide as a water treatment flocculant is more convenient and effective. It will also become the preferred product for most sewage treatment plants.

 

2. Sludge dewatering agent

 

Due to the increasingly complex nature of urban sewage discharge, the requirements for sludge dewatering agents in sewage treatment are becoming higher and higher. Single cationic polyacrylamide is no longer suitable for dewatering some sludge. Therefore, our company has developed a sludge dewatering agent with zwitterionic polyacrylamide for this situation. After dewatering experiments and use on various sludge, it has been found that it is superior to polyacrylamide with single ionic characteristics. Especially for sludge dewatering in refineries and chemical plants, the use of zwitterionic polyacrylamide has a more prominent effect.

 

3. Paper Additives

 

In the papermaking industry, zwitterionic polyacrylamide, as a chemical, cannot be compared to a single characteristic of polyacrylamide. Especially in terms of retention and filtration, it can improve the offline filtration speed, reduce fiber filler loss, and have a good effect on the wet end system. It also promotes and compensates for the smoothness, strength, and double-sided difference of the finished paper.

 

4. Profile control and water plugging agent

 

Oilfield experiments have shown that the performance of this new type of zwitterionic polyacrylamide profile control and water plugging agent is much higher than that of other single ion characteristic profile control and water plugging agents.

Technical support: Puyang Yiwang Information Technology Co., Ltd

Copyright of YuICPBei 2020028595-1 belongs to Puyang Rongtai Chemical Co., Ltd. It is a professional manufacturer of water treatment agents, oilfield drilling mud materials, environmental protection materials, and water purification materials. Welcome to inquire by phone!

云和县| 松原市| 新巴尔虎左旗| 东兰县| 玛沁县| 米林县| 平邑县| 会同县| 丰原市| 同江市| 孙吴县| 象山县| 弥渡县| 新巴尔虎左旗| 永仁县| 城固县| 西乌珠穆沁旗| 闵行区| 上饶市| 永善县| 娄底市| 林甸县| 静宁县| 金阳县| 桂阳县| 张家川| 新乡市| 颍上县| 松阳县| 蒲城县| 宁远县| 南靖县| 中方县| 四会市| 泉州市| 奈曼旗| 江川县| 枞阳县| 沾益县| 兴城市| 崇明县|